Association – ATEN Altuscn Matrix KVM Switch KM0532 User Manual
Page 60
KM0032 / KM0532 / KM0932 User Manual
48
Association
The Association page is used to associate a PN0108 PON (Power Over the
NET™) power outlet with a KVM port on the Matrix KVM Switch. Once an
association has been made, the power status of the device attached to the KVM
port can be controlled from the Port Access page, rather than having to control
the power status by opening a separate web session to the PN0108.
Note: 1. This page is only available through the Browser UI.
2. Use of this feature assumes you have installed a PN0108 and have
connected it to a device attached to a KVM switch port on the
installation, as shown in the diagram on page 131.
3. Visit our website for the latest PON firmware and up-to-date
information about supported PON models.
Power Management
When you select Association on the menu bar, it opens to the Power
Management page: