ATEN Altuscn Matrix KVM Switch KM0532 - Manual (Page 129)

Chapter 12. RS-232 Port Operation
117
LI
This command is used to list the KVM ports that are available on a particular
Console Module. The command takes two forms:
LI XX
LI ALL
Where:
Š XX is a two-digit number that represents the console port number on the
KM0532 / KM0932 that the Console Module you wish to access connects
to.
For example, LI 04 lists all the available KVM ports that are accessed
via the Console Module connected to console module port 4 of the
KM0532 / KM0932.
Š ALL causes all the available ports on all available Console Modules to be
listed.
LU
This command is used to list the user profiles of the users that have logged into
the KM0532 / KM0932 installation via the Console Modules. that are available
on a particular Console Module. The command takes two forms:
LU XX
LU ALL
Where:
Š XX is a two-digit number that represents the console port number on the
KM0532 / KM0932 of the Console Module whose logged in user you wish
to list.
For example, LU 02 lists the user profile of the user who is logged into
the Console Module connected to console module port 2 of the KM0532 /
KM0932.
Š ALL causes the user profiles of all the logged in users on all available
Console Modules to be listed.