Testing the media server leds, Disconnecting from the media server – Avaya S8710 User Manual
Page 40
Configuring the media server
40
Installing and Configuring the Avaya S8700 or S8710 Media Server
June 2004
5
Select the Change Modem Setting and click Continue.
6
In the
AT String
field, type the initialization commands appropriate for your modem and country
of operation. Click Help for guidance on what to enter.
For example, to change the country code to Japan, type
AT%T19,0,10
.
7
Click Change.
The system responds with a message indicating a successfully added modem route.
8
Click Close Window.
Testing the media server LEDs
1
Under Diagnostics, click Test Server LEDs to test the media server LEDs.
2
Observe the Active/Standby and U2 LEDs on the front of the media server and the transmit LED
on the duplication card on the back of the media server to ensure they are blinking. The blinking
stops after about a minute.
1
Disconnecting from the media server
1
Unplug the crossconnect cable from the services port on the back of the media server.