Avaya S8710 - Manual (Page 77)

7 Testing the media server installation
LED indicators
Installing and Configuring the Avaya S8700 or S8710 Media Server 77
June 2004
Uninterruptible power supply LEDs
The Powerware uninterruptible power supply (UPS) front panel has the LEDs shown in Figure 10, LEDs
on Powerware 9125 UPS, on page 77:
Figure 10: LEDs on Powerware 9125 UPS
After plugging in the UPS, all the LEDs flash briefly. After a self test, the Normal mode LED flashes,
indicating that the UPS is in Standby mode.
For more information on the LEDs, see the UPS user’s guide that comes with the Powerware UPS.
IPSI LEDs
The TN2312BP Internet Protocol Server Interface (IPSI) circuit pack LEDs are shown in Figure 11,
TN2312BP circuit pack faceplate, on page 78). It also has a programmable LED display to indicate
whether its IP address is dynamic (shows media gateway location) or static (shows I P). See Figure 12,
LED display on the IPSI circuit pack—static address, on page 79.
Figure notes
1 Normal mode indicator
2 Battery mode indicator
3 Bypass mode indicator
4 Test/Alarm reset button
5 Off button
6 On button
7 Bar graph indicators
8 Alarm indicators
1
2
3
4 5 6
7
8
ledlups KLC 030102