Avaya S8710 - Manual (Page 44)

3 Translating the IPSIs
Inputing translations
44 Installing and Configuring the Avaya S8700 or S8710 Media Server
June 2004
Inputing translations
Contact the installation personnel responsible for translation input to download the translations.
1 Type save translations and press Enter to save the translations to the hard drive.
If the translations are not ready, you may continue with the process, entering minimal translations to
verify connectivity to the port networks.
Resetting the media server
NOTE:
Do not reset the media server if no translations were input or if they were not entered in
bulk.
1 Type reset system 4 and press Enter to have the software read the copied translations.
Adding media gateways
NOTE:
Do this procedure only if the translations were not input earlier.
NOTE:
A cabinet is defined as up to 5 G650 Media Gateways mounted in a rack and TDM-
connected or 1 MCC1 Media Gateway.
1 Type add cabinet number (1 through 64) and press Enter for each stack of G650 Media
Gateways or MCC1 Media Gateway controlled by one TN2312BP IPSI circuit pack.
2 Fill in the location and carrier type for media gateways 2(B), 3(C), 4(D), and 5(E).
add cabinet 1 Page 1 of 1
CABINET
CABINET DESCRIPTION
Cabinet: 9
Cabinet Layout: G650-rack-mount-stack
Cabinet Type: expansion-portnetwork
Location: 1
Rack: Room: Floor: Building:
CARRIER DESCRIPTION
Carrier Carrier Type Number
E not-used PN 09
D not-used PN 09
C not-used PN 09
B G650-port PN 09
A G650-port PN 09