Avaya S8710 User Manual
Page 46
3 Translating the IPSIs
Administering the IPSIs
46
Installing and Configuring the Avaya S8700 or S8710 Media Server
June 2004
1
Type
add ipserver-interface
PNnumber
and press Enter to add the IPSI circuit pack
information.
2
When using a DHCP server, verify that the fields associated with the Primary IPSI and Secondary
IPSI (if equipped) are populated with default data.The
Host:
and
DHCP ID:
fields are set by
the DHCP server.
When using static addressing, in the
Host:
field, type in the IP address for the IPSI in the port
network listed in the
Location:
field.
3
Set the
IP Control?
field to y.
4
Verify that all the other fields are populated.
5
Press Enter to effect the changes.
6
Repeat steps 1 through 5 for each port network.
add ipserver-interface 4 Page 1 of 1
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 4
IP Control? y Socket Encryption? n
Enable QoS? n
Primary IPSI
------------
Location: 9A01
Host: ipsi-A09a
DHCP ID: ipsi-A09a
Secondary IPSI
--------------
Location: 9B01
Host: ipsi-A09b
DHCP ID: ipsi-A09b
add ipserver-interface 8
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 8
IP Control? y Socket Encryption? y
Enable QoS? y
Primary IPSI QoS Parameters
------------ --------------
Location: 1A01 Call Control 802.1p: 6
Host: 172.22.22.174 Call Control DiffServ: 46
DHCP ID: ipsi-A01a
Secondary IPSI
--------------
Location: 1B01
Host: 172.22.22.175
DHCP ID: ipsi-A01b