Sony DCR-PC105 - Manual (Page 10)

Quick Start Guide
10
Inserting a “Memory Stick”
While the access lamp is lit or flashing
Do not shake or strike your camcorder because your camcorder is reading the data from the
“Memory Stick” or recording data on the “Memory Stick.” Do not turn the power off, remove the
“Memory Stick” or remove the battery pack. Otherwise, image data breakdown may occur.
Quick Start Guide – Recording on a
“Memory Stick”
Connecting the power cord
Use the battery pack when using your camcorder outdoors (p. 15).
Open the
jack cover.
Connect the plug with its v
mark facing the grip belt.
Access lamp
1
2
3
How to hold your camcorder
Hold the camcorder, putting your wrist
through the belt and your fingers lightly on
the finger rest (p. 21).
Insert a “Memory Stick” in the “Memory Stick” slot as far as it can go with the B mark
facing the grip belt as illustrated.
To remove the “Memory Stick,” press the “Memory Stick” once lightly.
B mark
AC Adaptor (supplied)
Finger rest