Sony DCR-PC105 - Manual (Page 9)

Quick Start Guide
9
Recording a picture on the tape
(p. 28)
Monitoring the playback picture on the LCD
screen
(p. 42)
When you purchase your camcorder, the clock is not set up yet. If you want to record the date and
time for a picture, set the clock before recording (p. 23).
2
Set the POWER
switch to
CAMERA
while pressing
the small green
button.
4
Press START/
STOP. Your
camcorder starts
recording.
To stop
recording, press
START/STOP
again.
3
Press OPEN to
open the LCD
panel.
The picture
appears on the
screen.
Viewfinder
When the LCD panel is closed,
pull out the viewfinder placing
your eye against the eyecup.
Adjust the viewfinder lens to
your eyesight (p. 34).
1
Set the POWER
switch to VCR
while pressing the
small green
button.
3
Press of the touch panel to start
playback.
Note
When using the touch panel, press operation
buttons lightly with your finger supporting
the LCD panel from the back side of it. Do
not press the LCD screen with sharp objects
such as a pen.
2
Press of the touch panel to rewind the
tape.
Do not pick up
your camcorder
by the parts
illustrated.
Viewfinder LCD panel Battery pack Flash
LOCK
MEMORY CAMERA
VCR
(CHG)OFF
POWER
LOCK
MEMORY CAMERA
VCR
(CHG)OFF
POWER
LOCK
MEMORY CAMERA
VCR
(CHG)OFF
POWER
1
Remove the lens cap.