Sony DCR-PC105 - Manual (Page 126)

126
Your camcorder can record moving picture data as a still image on a “Memory Stick.”
Image size is automatically set to 640
× 480.
Before operation
Insert the “Memory Stick” and the recorded tape into your camcorder.
The POWER switch should be set to .
Operate by touching the panel.
(1) Press . The picture recorded on the tape is played back.
(2) Keep pressing PHOTO lightly and check the image. The picture from the tape
freezes and the CAPTURE indicator appears on the screen. Recording does not
start yet.
To change the still image, release PHOTO, select a still image again, and then
press and hold PHOTO lightly.
(3) Press PHOTO deeper. Recording is complete when the bar scroll indicator
disappears. The image displayed on the screen when you pressed PHOTO
deeper will be recorded on the “Memory Stick.”
Recording an image from a tape as a still
image
2
3
101
FINE
640
50 min
101
12
CAPTURE
FINE
640
50 min
1
Sound recorded on the tape
You cannot record audio from the tape.
Title
You cannot record the titles.
Recording date/time
The date/time when it is recorded on the “Memory Stick” is recorded. Various settings
are not recorded.
When you press PHOTO on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.