Sony DCR-PC105 - Manual (Page 25)

25
Getting Started
Your camcorder has operation buttons on the LCD screen.
Touch the LCD screen directly with your finger to operate each function.
(1) Set the POWER switch to CAMERA for recording, VCR for playback, or
MEMORY to use a “Memory Stick.”
(2) Press OPEN to open the LCD panel.
(3) Press FN. Operation buttons on PAGE1 are displayed on the LCD screen.
If FN is not on the LCD screen, touch the LCD screen lightly to make it appear.
You can control the display with DISPLAY/BATT INFO on your camcorder.
(4) Press PAGE2/PAGE3 to display PAGE2/PAGE3. Operation buttons on
PAGE2/PAGE3 are displayed on the LCD screen.
(5) Press the desired operation item. See relevant pages of this manual for each
function.
To return to FN
Press EXIT.
To execute settings
Press OK. The display returns to PAGE1/PAGE2/PAGE3.
Step 4 Using the touch panel
2 1
3
SPOT
METER
MENU
SPOT
FOCUS
FADER END
SCH EXPO-
SURE
PAGE2 PAGE3 EXIT PAGE1
When the POWER switch is set
to CAMERA
DISPLAY/BATT INFO