Sony DCR-PC105 - Manual (Page 11)

Quick Start Guide
11
Recording still images on the “Memory Stick”
(p. 120)
Monitoring a still image on the LCD screen
(p. 144)
1
Set the POWER switch to
MEMORY while pressing
the small green button.
Make sure that the LOCK
switch is set to the right
(unlock) position.
2
Press PLAY. The last recorded
image is displayed.
1
Remove the lens cap.
Viewfinder
When the LCD panel is closed,
pull out the viewfinder placing
your eye against the eyecup.
Adjust the viewfinder lens to your
eyesight (p. 34).
3
Press OPEN to
open the LCD
panel.
The picture appears
on the screen.
2
Set the POWER switch to
MEMORY while pressing the small
green button.
Make sure that the LOCK switch is
set to the right (unlock) position.
Do not pick up
your camcorder
by the parts
illustrated.
LOCK
MEMORY CAMERA
VCR
(CHG)OFF
POWER
When you purchase your camcorder, the clock is not set up yet. If you want to record the date and
time for a picture, set the clock before recording (p. 23).
LOCK
MEMORY CAMERA
VCR
(CHG)OFF
POWER
PLAY
5
Press PHOTO deeper.
The image displayed
when you press PHOTO
deeply is recorded on
the “Memory Stick.”
4
Press PHOTO lightly.
You can record when
the green z stops
flashing and remains lit.
12 FINE
640
FINE
640
Viewfinder LCD panel Battery pack Flash