Sony DCR-PC105 - Manual (Page 17)

17
Getting Started
Notes
•Prevent metallic objects from coming into contact with the metal parts of the DC plug
of the AC Adaptor. This may cause a short-circuit and damage the AC Adaptor.
•Your camcorder will be less balanced when placed on the table etc., with the battery
pack NP-FM91/QM91/QM91D installed.
When you use the AC Adaptor
Place the AC Adaptor near a wall outlet. While using the AC Adaptor, if any trouble
occurs with this unit, disconnect the plug from a wall outlet as soon as possible to cut
off the power.
While charging the battery pack, the battery CHARGE lamp flashes in the
following cases:
– The battery pack is not installed correctly.
– Something is wrong with the battery pack.
PRECAUTION
The set is not disconnected from the AC power source (house current) as long as it is
connected to the wall outlet, even if the set itself has been turned off.
Charging time
Approximate minutes at 25°C (77°F) to charge an empty battery pack.
The charging time may increase if the battery’s temperature is extremely high or low
because of the ambient temperature.
Battery pack Full charge
NP-FM30 (supplied) 145
NP-FM50 150
NP-FM70 240
NP-QM71/QM71D 260
NP-FM91/QM91/QM91D 360
Step 1 Preparing the power source