Sony DCR-PC105 - Manual (Page 207)

207
Troubleshooting
Types of trouble and how to correct trouble
Others
Symptom Cause and/or Corrective Actions
• The cassette has no Cassette Memory.
c Use the cassette with Cassette Memory (p. 106).
• The Cassette Memory is full.
c Erase unnecessary title (p. 108).
• The cassette is set to prevent accidental erasure.
c Slide the write-protect tab to REC (p. 215).
• You tried to superimpose a title on a blank portion of the
tape.
c Superimpose the title to the recorded portion (p. 106).
• The cassette has no Cassette Memory.
c Use the cassette with Cassette Memory (p. 110).
• The Cassette Memory is full.
c Erase unnecessary data (p. 111).
• The tape is set to prevent accidental erasure.
c Slide the write-protect tab to REC (p. 215).
• The input selector on the VCR is not set correctly.
c Set the selector correctly, then check the connection
between the VCR and your camcorder (p. 88).
• Your camcorder is connected to DV equipment of other
than Sony using the i.LINK cable.
c Set it to IR (p. 88).
• Setting a program on a blank portion of the tape is
attempted.
c Set the program again on a recorded portion (p. 94).
• The synchronization of your camcorder and the VCR is
not adjusted.
c Adjust the synchronization of the VCR (p. 92).
• The IR SETUP code is not correct.
c Set the correct code (p. 91).
• Setting a program on a blank portion of the tape is
attempted.
c Set the program again on a recorded portion (p. 139).
• COMMANDER is set to OFF in in the menu settings.
c Set it to ON (p. 200).
• Something is blocking the infrared rays.
c Remove the obstacle.
• The button type lithium battery is inserted in the battery
holder with the +/– polarities not matching the +/–
marks.
c Insert the button type lithium battery with the correct
polarity (p. 235).
• The button type lithium battery is dead.
c Insert new one (p. 235).
• DISPLAY is set to V-OUT/LCD in in the menu
settings.
c Set it to LCD (p. 200).
• VIDEOINPUT is not set correctly in the menu settings.
c Set it correctly (p. 98, 187).
(continued on the following page)
A title is not recorded.
A cassette label is not recorded.
Digital program editing to the tape
does not function.
Digital program editing to the
“Memory Stick” does not function.
The Remote Commander supplied
with your camcorder does not work.
The picture from a TV or VCR does
not appear even when your
camcorder is connected to the
outputs on the TV or VCR.