Sony DCR-PC105 User Manual
Page 138
138
Recording a picture from a tape as a moving picture
Titles
You cannot record the titles.
If the “
AUDIO ERROR” indicator appears
Sound that cannot be recorded by your camcorder has been recorded. Connect the A/V
connecting cable to input images played back on an external device (p. 97).
Data code recorded on the tape
Instead of the date/time when the picture was recorded on the tape, the date/time
when the picture is recorded on the “Memory Stick” (transferred from the tape) is
recorded on the “Memory Stick.” The various settings that may be saved on the tape are
not recorded.
Recording a moving picture from other equipment
You can use either A/V connecting cable or i.LINK cable. See page 97 for the
connection.
When connecting with the A/V connecting cable, set DISPLAY in
to LCD in the
menu settings. (The default setting is LCD.)
Also, select the video jack for connection (p. 98).
The POWER switch should be set to
.
(1) Play back the recorded tape on the VCR, or turn the TV on to see the desired
program.
The image of the other equipment is displayed on the LCD screen or in the
viewfinder.
(2) At the starting point of the picture you want to record, press START/STOP.
Note
Your camcorder may stop recording the image, or the recorded image may appear
jagged:
– If the tape has the blank portion
– If the tape is in poor condition due to being used repeatedly for dubbing
– If the input signal is cut off during recording