Sony DCR-PC105 - Manual (Page 168)

168
MEMORY MIX Album
Once “ImageMixer” is installed, the MEMORY MIX album is created in “Album” of
“ImageMixer” and sample images are stored in there.
Those sample images can be transferred from the MEMORY MIX album to a “Memory
Stick” so that they can be used in MEMORY MIX (p. 128).
For details on the operation procedure, refer to the on-line help.
Replacing WinASPI
To use the ImageMixer CD writing function, you need to install WinASPI. If a different
writing application was already installed, its writing function may not work correctly. If
that happens, reinstall the original application and replace WinASPI. Note that the
ImageMixer CD writing function may not work properly.
Making the computer recognize your camcorder
If you are using Windows 2000, log in with permission of administrators.
If you are using Windows XP, log in with permission of computer administrators.
Viewing pictures recorded on the tape
(1) Connect the AC Adaptor to your camcorder.
(2) Set the POWER switch to
.
(3) Press FN to display PAGE1.
(4) Press MENU to display the menu.
(5) Select USB STREAM in
, then press EXEC.
(6) Select ON, then press EXEC.
(7) Connect the (USB) jack on your camcorder to the USB port on the computer
using the supplied USB cable.
The computer recognizes your camcorder, and the Windows Add Hardware
Wizard starts.
Connecting your camcorder to a computer using the USB cable
(For Windows users)
USB port
USB cable (supplied)
(USB) jack
Computer