Sony DCR-PC105 - Manual (Page 77)

77
Advanced Playback Operations
The POWER switch should be set to .
Operate by touching the panel.
(1) During playback or playback pause, press FN and select PAGE2.
(2) Press DIG EFFT. The screen to select a digital effect is displayed.
(3) Select the desired mode. You can use STILL, FLASH, LUMI. and TRAIL.
When you select STILL or LUMI., the picture that you select the mode for is
stored in memory as a still image. See page 61 for details of the each effect.
(4) Press –/+ to adjust the effect.
(5) Press
OK to return to PAGE2.
To return to FN
Press EXIT.
To cancel digital effect
Press OFF to return to PAGE2.
Notes
•You cannot process externally input scenes using digital effect.
•You cannot record images on the tape on your camcorder while you are processing
the image using digital effect. Record images on a “Memory Stick” (p. 126, 137), or on
a VCR using your camcorder as a player.
Pictures processed by digital effect
These pictures are not output through the DV Interface.
Playing back a tape with digital effect
2
DIG
EFFT
OK OFF
STILL FLASH LUMI. TRAIL
DIG EFFT