Sony DCR-PC105 - Manual (Page 154)

154
To prevent accidental erasure of important images, you can protect selected images.
The POWER switch should be set to .
Operate by touching the panel.
(1) Press INDEX.
(2) Press - MARK. The screen to protect the image appears.
(3) Press the image you want to protect. The - indicator appears above the
protected image.
To return to FN
Press EXIT.
To cancel image protection
Press the image you want to cancel image protection for in step 3 again.
The - indicator disappears from the image.
Note
Formatting erases all information on a “Memory Stick,” including protected image data.
Check the contents of the “Memory Stick” before formatting.
If the write-protect tab on the “Memory Stick” is set to LOCK
You cannot protect an image or vice versa.
Preventing accidental erasure
– Image protection
1
INDEX
2,3
- MARK
1 2 3
4 5 6
EXIT RET.
T t
MARK
101 2 / 8