Sony DCR-PC105 - Manual (Page 70)

70
The focus is adjusted to the point you selected.
The POWER switch should be set to or .
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press SPOT FOCUS. The SPOT FOCUS screen appears.
(3) Press the desired area in the frame.
The SPOT FOCUS indicator flashes on the screen. The focus of the point you
selected is adjusted.
(4) Press OK to return to PAGE1. The FOCUS setting changes to the manual
mode (p. 68).
To return to FN
Press EXIT.
To return to the autofocus
On the SPOT FOCUS screen, press AUTO to return to PAGE1.
Notes
• Spot Focus does not work while PROGRAM AE is on.
• The back light function does not work during Spot Focus.
Focal distance information
It is not displayed on the screen.
Using spot focus function – Spot Focus
2
SPOT
FOCUS
OK AUTO
SPOT FOCUS