APC AXFA11G - Manual (Page 113)

IM 01E20C01-01E 11-5
11. OUTLINE
■ ACCESSORIES
Fuse (Time lag fuse): 1 pc.
• Power supply code 1; T2.5 A, 250 V
• Power supply code 2; T3.15A, 250 V
Mounting bracket: 1 set
■ MODEL AND SUFFIX CODE
AXFA11 Magnetic Flowmeter Remote Converter:
Model Suffix Code Description
AXFA11
Use
Output Signal
and
Communication
Power Supply
Electrical
Connections
Indicator
Option
Magnetic Flowmeter Remote Converter
General-Purpose Use
For AXF Remote Flowtube of size
2.5 to 2600 mm (0.1 in. to 104 in.)
4 to 20 mA DC,
BRAIN Communication
4 to 20 mA DC,
HART Communication
100 V to 240 V AC or
100 to 120 V DC
24 V AC/DC
(*1)
JIS G1/2 female
ANSI 1/2 NPT female
ISO M20
ϫ 1.5 female
With Indicator
Optional code (See the Table of
Optional Specifications)
G · · · · · · · · · · · · ·
-D · · · · · · · · · ·
-E · · · · · · · · · ·
1 · · · · · · · ·
2 · · · · · · · ·
-0 · · · · · ·
-2 · · · · · ·
-4 · · · · · ·
1 · · · ·
/ ٗ
T03.EPS
*1: In case of power supply code 2 (24 V AC/DC), optional
code A (lighting protector) is mandatory.
Signal Cable:
Model Suffix Code Description
AXFC
Termination
Cable
Length
Option
Magnetic Flowmeter
Dedicated Signal cable for the
ADMAG AXF series
No Termination. A set of termination
parts for M4 screws is attached.
Terminated for the AXFA11/14
Converter.
Designate the cable length, unit: m
Following “L”, specify the cable in
three digits as multiple of 1 meter
(e.g., 001, 002, or 005)
for a length up to 5 m, or as
a multiple of 5 meters (i.e., 005,
010, 015, or the like).
The maximum cable length:
200 m for combined use with AXFA11
100 m for combined use with AXFA14
With termination parts sets.
Following “C”, specify the q’ty of sets
of termination parts in one digits.
· · · · · · · · · · · · ·
-0 · · · · · · · · · · ·
-4 · · · · · · · · · · ·
-L ٗٗٗ · · · ·
/C ٗ
T04.EPS
Note: • The cable is constructed with double shielding
over the two conductors, and uses heat-resistant
vinyl as the outer covering material.
Finished diameter: 10.5 mm (0.413 in.)
Maximum temperature: +80˚C (+176˚F)
• Unnecessary to order the above cable for
submersible type flowtube or for the optional
code DHC flowtube because the flowtube is
wired with 30 m (98 ft) cable.
• For excitation cable, prepare a two-core cable at the
customer side.