Panasonic CS-XE9PKUA - Manual (Page 33)

33
12.1.5 Automatic Operation
š This mode can be set using remote control and the operation is decided by remote control setting temperature,
remote control operation mode and indoor intake air temperature.
š During operation mode judgment, indoor fan motor (with speed of Lo-) is running for 30 seconds to detect the
indoor intake air temperature.
š Every 10 minutes, the indoor temperature is judged.
š For the 1st judgment
o
If indoor intake temperature - remote control setting temperature ≥ 3.6°F (2°C), COOL mode is decided.
o
If -3.6°F (-2°C) ≤ indoor intake temperature - remote control setting temperature < 3.6°F(2°C), DRY mode is
decided.
o
If indoor intake temperature - remote control setting temperature < -3.6°F (-2°C), HEAT mode is decided.
š For the 2nd judgment onwards
o
If indoor intake temperature - remote control setting temperature ≥ 5.4°F (3°C), if previous operate in DRY
mode, then continue in DRY mode. otherwise COOL mode is decided.
o
If -3.6°F (-2°C) ≤ indoor intake temperature - remote control setting temperature < 5.4°F (3°C), maintain with
previous mode.
o
If indoor intake temperature - remote control setting temperature < -3.6°F (-2°C), HEAT mode is decided.
12.1.6 Fan Operation
š Fan Operation is used to circulate air in a room.
š During operation, indoor fan run continuously but outdoor fan and compressor stop.
š Temperature setting is not applicable.
12.2 Indoor Fan Motor Operation
12.2.1 Basic Rotation Speed (rpm)
A. Basic Rotation Speed (rpm)
i. Manual Fan Speed
[Cooling, Dry]
š Fan motor’s number of rotation is determined according to remote control setting.
Remote control ○ ○ ○ ○ ○
Tab Hi Me+ Me Me- Lo
[Heating]
š Fan motor’s number of rotation is determined according to remote control setting.
Remote control ○ ○ ○ ○ ○
Tab SHi Me+ Me Me- Lo