Armstrong World Industries HWC PREMIER 183 - Manual (Page 100)

Service Reference Manual UNIT COMPONENTS
5-37
SRM-HW/HWC 2/99
30°
4.25"
Ref.
6.16" .13" Typ.
.12" Typ.
13.13" Ref.
14.74"
3.500" Diameter
1 Turn
3.00" Mandrel
11.00"
Ref.
12.91"
.25" Rad. I.S. Typ.
53025B025 - 2 Req’d
.75" Typ.
.75" Rad. Typ.
10.70 "
1.446 Diameter "
1.25
Turns
5302B025 - 2 Req’d
.750 Rad.
Typical
"
1.28"
.50" +/– .13"
16.40"
12.22 +/ .13 " – "
.75"
.13"
.08"
30°
.250"
Rad. I.S.
Typical
16.40"
1.25
Turns
5302B025 - 2 Req’d
.750" Rad.
Typical
1.28"
.50" +/– .13"
10.70"
3.196" Diameter
3.81"
2.73"
.75"
.08"
50°
.250 Rad. I.S.
Typical
"
3.688 Diameter
3 Turns
"
5302B025 -2 Req’d
2.50" .75"
.25 Rad. I.S. Typ. "
.13"
.08"
30°
3.05" 3.60"
2.25"
.75"
1.55" .75" Rad.
Notes:
• All bends 90° unless otherwise noted.
• Do not kink or flatten during forming.
• Tape tubes together with masking tape.
FIGURE 5-30 43281-001 Capillary Tubes FIGURE 5-31 40651-001 Capillary Tubes
FIGURE 5-32 40652-001 Capillary Tubes FIGURE 5-33 39103B001 Capillary Tubes