Armstrong World Industries HWC PREMIER 183 - Manual (Page 63)

4-8
COMPONENT LOCATION ILLUSTRATIONS Magic-Pak: HW/HWC
SRM-HW/HWC 2/99
BLOWER WHEEL (*73)
ARMSTRONG P/N 34833B001
10.75" x 4"
CIRCULATING AIR BLOWER MOTOR (*69)
(12) ARMSTRONG P/N 39045B001
(24-30) 39046B001
MOTOR MOUNTING BRACKET (*71, 72)
BAND - ARMSTRONG P/N 07407B000 (1)
ARMS - ARMSTRONG P/N 07408B004 (3)
BLOWER HOUSING (*74)
ARMSTRONG P/N 39010B001
SEE FIGURE 4-6
FOR FAN CONDENSING
PARTS
FILTER RETAINER
ARMSTRONG P/N 38072B001
FILTER STOP
ARMSTRONG P/N 38703B001
FILTER RETAINER
ARMSTRONG P/N 38072B001
EVAPORATOR DRAIN
TUBE CONNECTION
.63" (5/8")* FILTER (*127) SIZE
16.5" x 25" x .50"
ARMSTRONG P/N 06131B046
NOTE:
WHEN USING A REPLACEMENT FILTER WITH
A MANUFACTURED FRAME, THE DIMENSIONS
MAY NEED TO BE REDUCED FOR PROPER FIT.
TAKE AND RECORD MEASUREMENTS FOR
PROPER FIT.
R
O
T
A
T
IO
N
REQUIRES DRAIN HOSE
ARMSTRONG P/N 03613A001 (NOT SHOWN)
(5/8") I.D. *
HWC Chassis Assembly -
Circulating Air Blower Partially Removed
FIGURE 4-7
The numbers in parentheses in the drawing above refer to the section number each part is assigned. These num-
bers are provided here to aid in locating the parts in the Parts List section found beginning on page 8-1.