Beijer Electronics BFI-H2 V1.12 - Manual (Page 3)

User Guide Revision 1.12
3
IP66 Quick Start Up Guide
HVAC Display
(Status, Diagnostics, and Programming)
Motor Cable Sizes
Check the rating information in
section 13.4.
Motor Connections
Check for Star or Delta connection
according to the motor voltage rating in
section 4.5.
Motor Nameplate Details
Motor Rated Voltage: P1-07
Motor Rated Current: P1-08
Motor Rated Frequency: P1-09
Motor Rated Speed (Optional): P1-10
Mechanical Mounting
Information can be found in section 3.5.
Control Terminal
Configuration based on factory settings
Hardware
Link the terminals as shown, optionally
through switch contacts to enable drive
operation
Close the switch to run (enable)
Open the switch to stop
Keypad Operation can be found in
section 5.5
Applies to Switched version only
In-built Isolator:
Mains Power On / Off
Fuses or MCB
Check Drive
Rating info in
section 13.4.
AC Supply Connection
200 – 240 Volts + / - 10%: 1 / 3 Phase
380 – 380 Volts + / - 10%: 3 Phase
Check Drive Input Voltage information
in section 13.2
PE L1 L2 L3
Run / Stop 10K Pot
RJ45
Connector