Xerox WorkCentre M20-M20i-2723 - Manual (Page 140)

Page 9-14 Xerox WorkCentre M20i System Administration Guide
Scan to E
m
ail
Default Subject
This feature allows you to automatically enter information into the Subject field of the Email.
To enter a default subject:
¾ Press the [Machine Status] button. 1
2
¾ Press or until System
Admin Tools is displayed and
press [Enter].
¾ If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Press or until Email
Setup is displayed and press
[Enter].
¾ Press or until Default
Subject is displayed and press
[Enter].
Email Setup
[Default Subject]
4
¾ If you want to enter a default
subject, press or until
On is displayed and press [Enter].
Enter the default subject using
the keyboard and press [Enter].
¾ Otherwise, choose Off and press
[Enter].
Default Subject
[On]