Xerox WorkCentre M20-M20i-2723 - Manual (Page 191)

Xerox WorkCentre M20i System Administration Guide Page 11-23
Ad
ministratio
n
Too
ls Defining the Printer
Use these instructions to change the printer’s name and location.
To define the printer, perform these steps:
¾ Enable CentreWare Internet Services (see “Enabling Internet Services” on page 11-20).
¾ At the CentreWare Internet Services Home Page for the WorkCentre M20i, select the
[Properties] tab.
¾ Enter the [Machine Name], but only if necessary.
¾ Enter the [Machine Location], if required.
¾ Click the [Apply] button to implement any changes.
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
¾ Select the [Status] tab and then select [Reset Network Controller] to enable the
selection to take effect.
1
2
3
4
5
6