Xerox WorkCentre M20-M20i-2723 - Manual (Page 174)

Page 11-6 Xerox WorkCentre M20i System Administration Guide
Adm
inistr
a
tion
T
ools
5
¾ Press or until
Department Mode is displayed
and press [Enter].
¾ To enable Department Mode,
press or until On is
displayed and press [Enter].
Otherwise display Off and press
[Enter].
Management
[Department Mode]
6
¾ Press or until Clear
Department is displayed and
press [Enter].
¾ To clear the Journal, press or
until Journal is displayed and
press [Enter].
¾ To remove a Department Code,
press or until Code is
displayed and press [Enter].
Choose All and press [Enter] to
remove all Department Codes.
To remove individual Department
Codes, choose Each, press
[Enter], enter the Department
Number and confirm the removal.
Management
[Clear Department]