Xerox WorkCentre M20-M20i-2723 - Manual (Page 215)

Xerox WorkCentre M20i System Administration Guide Index-i
Index
A
About this guide 1-3
Add Authenticated Users 9-9
Administration Tools 11-1
Clear Memory 11-13
ControlCentre 11-33
Department Codes 11-2
Internet Services 11-20
Maintenance Tools 11-14
Network Tools 11-11
Passcode Protection 11-9
Advanced TCP/IP Setup 6-1
Enabling/Disabling HTTP 6-8
Enabling/Disabling LPR/LPD 6-3
Enabling/Disabling Raw Printing 6-5
Information Checklist 6-2
Alert Notifications 11-25
AppleTalk 5-1
Information Checklist 5-2
Installation Procedure 5-3
Network Communication Setup 5-3
Printer Driver Installation (Mac OS 8x,9x only)
5-5
Printer Driver Installation (Mac OSX only) 5-7
Setting the Printer Driver (Mac OS 8x,9x only)
5-6 , 5-8
Test Print 5-9
AppleTalk Configuration 7-8
Authentication 9-7 , 9-24
Auto Send to Self 9-17
Automatically setting TCP/IP Addresses 2-8
B
Basic Network Installation 2-1
Automatically setting TCP/IP Addresses 2-8
Basic TCP/IP Settings 2-5
Ethernet Port Setup 2-3
Information Checklist 2-2
Manually setting TCP/IP Addresses 2-10
Network Communication Setup 2-8
TCP/IP Enabling or Disabling 2-6
Test Print 2-13
Workstation Setup 2-12
Basic TCP/IP Settings
Installation Procedure 2-5
Billing Checking 11-26
Billing Counters 11-19
C
Calling for service 1-5
CentreWare DP
NetWare Installation 3-5
Network Communication Setup 3-5
Setup 3-7
CentreWare Internet Services 7-1 , 9-2
Changing the Master Code 11-7
Checking Configurations 11-24
Clean Drum 11-18
Clear Memory 11-13
Configuring Email Settings
Auto Send to Self 9-17
Default From 9-15
Default Subject 9-14
Guest User Access 9-16
Configuring SMTP
Add Authenticated Users 9-9
Authentication 9-7
Delete Authenticated Users 9-11