Xerox WorkCentre M20-M20i-2723 - Manual (Page 145)

Xerox WorkCentre M20i System Administration Guide Page 9-19
Scan to Email
Primary LDAP IP Address
This feature allows you set the primary IP address for LDAP.
NOTE: The default Port is the industry standard 389.
To enter the LDAP IP address:
¾ Press the [Machine Status] button. 1
2
¾ Press or until System
Admin Tools is displayed and
press [Enter].
¾ If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Press or until Email
Setup is displayed and press
[Enter].
¾ Press or until LDAP
Server Setup is displayed and
press [Enter].
Email Setup
[LDAP Server Setup]
4
¾ Press or until Pri LDAP
IP (or Alt LDAP IP) is displayed
and press [Enter]
¾ Enter the LDAP IP address using
the keypad.
Press the period on the
keyboard to insert the dot
between each group.
LDAP Setup
[Pri LDAP IP]