Xerox WorkCentre M20-M20i-2723 - Manual (Page 205)

Xerox WorkCentre M20i System Administration Guide Page 11-37
Ad
ministratio
n
Too
ls
Enabling or Disabling Auxiliary Access
Auxiliary Access allows a foreign interface board to be recognized.
To enable or disable Auxiliary Access:
¾ Press the [Machine Status] button. 1
2
¾ Press or until System
Admin Tools is displayed and
press [Enter].
¾ If the System Admin Tools has
already been passcode
protected, type in the password
and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Press or until Auxiliary
Access is displayed and press
[Enter].
¾ To enable Auxiliary Access, press
or until On is displayed
and press [Enter]. Otherwise
display Off and press [Enter].
System Admin Tools
[Auxiliary Access]