Multi-zone setup, Making multi-zone connections, Connecting your equipment 03 – Pioneer SC-LX82 User Manual
Page 37: Multi-zone listening options, With video signals, Signals can be output, But the s-video signal cannot be output, Zone 3 analog audio signals (audio zone 3 out)
Connecting your equipment
03
37
En
MULTI-ZONE setup
This receiver can power up to three independent systems in separate rooms after you have made the proper MULTI-
ZONE connections. An example MULTI-ZONE setup is shown below, but the number of MULTI-ZONE connections (and
the way you choose to connect them) depends on how you want to set up your system.
Different sources can be playing in three zones at the
same time or, depending on your needs, the same source
can also be used. The main and sub zones have
independent power (the main zone power can be off
while one (or both) of the sub zones is on) and the sub
zones can be controlled by the remote or front panel
controls. However, you may need to specify the volume
settings in
ZONE Audio Setup on page 126.
Making MULTI-ZONE connections
It is possible to make these connections if you have a
separate TV and speakers for your primary (
ZONE 2) sub
zone, and a separate TV and a separate amplifier
1
(and
speakers) for your secondary (
ZONE 3) sub zone. You will
also need a separate amplifier if you are not using the
MULTI-ZONE setup using speaker terminals (ZONE 2) on
page 38 for your primary sub zone. There are two primary
sub zone setups possible with this system. Choose
whichever works best for you.
MULTI-ZONE listening options
The following table shows the signals that can be output
to ZONE 2 and ZONE 3:
LAN
(10/100)
SPEAKERS
CAUTION:
SPEAKER IMPEDA
ATTENTIO
ENCEINTE D'IMPE
OPTICAL
RS-232C
HDMI
IR
CONTROL
BD
IN
12 V
TRIGGER
IN
1
IN
2
IN
3
OUT
1
OUT
2
OUT 1
OUT 2
ASSIGNABLE
3
1
-
(KURO
LINK )
ASSIGNABLE
COAXIAL
ASSIGNABLE
(CD-R)
IN
4
(VIDEO1)
IN
3
(DVR)
IN
2
(TV/SAT)
IN
1
IN
3
(VIDEO 2)
IN
2
(CD)
IN
1
(DVD)
IN
1
(OUTPUT
12V
TOTAL
50 mA
MAX)
1
2
IN
1
IN
IN
2
OUT
OUT
(DVD)
P
R
P
B
Y
P
R
(DVR
ZONE 2 OUT
ZONE 2
OUT
VIDEO
ZONE 3
OUT
PH
SI
G
L
R
SEE INSTRUCTION
MANUAL
SELECTABLE
VOIR LE MODE
D'EMPLOI
SELECTABLE
ZONE 2
OUT
VIDEO
ZONE 3
OUT
L
R
R
L
AUDIO IN
VIDEO IN
VIDEO IN
R
L
AUDIO IN
Main zone
Sub zone (
ZONE 2)
Sub zone (
ZONE 3)
Note
1 You can’t use sound controls (such as the tone controls or Midnight listening) or any surround modes with a separate amplifier in the sub
zone. You can, however, use the features available with your sub zone amplifier.
Sub Zone
Input functions available
ZONE 2
Analog audio signals (AUDIO ZONE 2 OUT).
a
With video signals,
b
the composite video
(VIDEO ZONE 2 OUT) and component video
(COMPONENT VIDEO ZONE 2 OUT)
c
signals
can be output
d
but the S-Video signal cannot
be output.
a.Any analog signal. (This does not apply for the MULTI CH IN and
PHONO inputs.)
b.JPEG files cannot be played with the input set to USB input.
c.The COMPONENT VIDEO ZONE 2 OUT jack is only provided on the
SC-LX82. The OSD is not displayed if only the COMPONENT VIDEO
ZONE 2 OUT jack is connected.
d.
SC-LX82 only: The video convert function does not work for ZONE 2.
Connect the composite video and component video to the same
types of jacks for the inputs and outputs.
ZONE 3
Analog audio signals (AUDIO ZONE 3 OUT).
a
With video signals,
b
the composite video
(VIDEO ZONE 3 OUT) signals can be output.
SC-LX82_LX72.book Page 37 Thursday, April 23, 2009 7:05 PM