Pioneer SC-LX82 - Manual (Page 89)

Using other functions 09
89
En
• When using ZONE 2 and ZONE 3, it is not possible to
use the multi-zone function to play different inputs
from among Home Media Gallery or iPod/USB. (It is
possible to play when using the main zone and ZONE
2 or the main zone and ZONE 3.)
4 Use the MASTER VOLUME dial to adjust the
volume for the zone you have selected.
This is only possible if you selected the
Variable volume
control in ZONE Audio Setup on page 126.
1
5 When you’re finished, press MULTI-ZONE
CONTROL again to return to the main zone controls.
You can also press
MULTI-ZONE ON/OFF on the front
panel to switch off all output to the sub zone(s).
2
MULTI-ZONE remote controls
Set the MULTI-ZONE operation switch to ZONE 2 or ZONE
3 to operate the corresponding zone.
The following table shows the possible MULTI-ZONE
remote controls:
Making an audio or a video recording
You can make an audio or a video recording from the
built-in tuner, or from an audio or video source
connected to the receiver (such as a CD player or TV).
3
Keep in mind you can’t make a digital recording from an
analog source or vice-versa, so make sure the
components you are recording to/from are hooked up in
the same way (see
Connecting your equipment on
page 19 for more on connections).
Since the video converter is not available when making
recordings (from the video
OUT jacks) make sure to use
the same type of video cable for connecting your recorder
as you used to connect your video source (the one you
want to record) to this receiver. For example, you must
connect your recorder using Component video if your
source has also been connected using Component video.
For more information about video connections, see
Connecting an HDD/DVD recorder, VCR and other video
sources on page 32.
SC-LX82:
SC-LX72:
1 Select the source you want to record.
Use the input function buttons (or INPUT SELECT).
• If necessary, set the remote control to the receiver
operation mode, then press SIGNAL SEL to select the
input signal corresponding to the source component
(see
Choosing the input signal on page 65 for more
on this).
Note
1 The volume levels of the main and sub zones are independent.
2 • You won’t be able to switch the main zone off completely unless you’ve switched off the MULTI-ZONE control first.
• If you don’t plan to use the MULTI-ZONE feature for a while, turn off the power in both the sub and main rooms so that this receiver is in
standby.
Button What it does
 Switches on/off power in the sub zone.
INPUT SELECT Use to select the input function in the sub
zone.
Input function
buttons Use to select the input function directly (this
may not work for some functions) in the sub
zone.
MASTER
VOLUME +/–
(SC-LX72)
Use to set the listening volume in the sub
zone.
VOL +/–
(SC-LX82)
MUTE Mutes the sound or restores the sound if it
has been muted (adjusting the volume also
restores the sound).
3 • The receiver’s volume, Audio parameters (the tone controls, for example), Video parameters and surround effects have no effect on the
recorded signal.
• Some digital sources are copy-protected, and can only be recorded in analog.
• Some video sources are copy-protected. These cannot be recorded.
DVD
MULTI
OPERATION
ZONE2 3
VIDEO1
iPod
USB
MULTI CH
GALLERY
HOME MEDIA
CD
PHONO IN
TUNER
VIDEO2 HDMI
BD TV DVR
CD-R
INPUT SELECT
DVD
VIDEO1
iPod
USB
MULTI CH
GALLERY
HOME MEDIA
CD
PHONO IN
TUNER
VIDEO2 HDMI
BD TV DVR
CD-R
INPUT SELECT
SOURCE
TV RECEIVER
INPUT MUTE MUTE
VOL
VOL
TV CONTROL
CH
RECEIVER
THX PQLS MPX
PGM MENU
STEREO
SIGNAL SEL SLEEP AUDIO
INFO
DIMMER
A.ATT SBch MCACC
HDMI OUT
D.ACCESS CLASS
DISP
CH
AUTO/ALC/ DIRECT STANDARD ADV SURR
DVD BD DVR HDMI
TV CD CD-R
TUNER
HOME MEDIA
GALLERY
iPod USB
1 2 3
HDMI OUT
SLEEP MCACC
INPUT
SELECT
SIGNAL SEL
4 5 6
DIMMER A ATT SBch
VIDEO 1 VIDEO 2
DVD BD DVR HDMI
TV CD CD-R
TUNER
HOME MEDIA
GALLERY
iPod USB
1 2
INPUT
SELECT
SIGNAL SEL
4
VIDEO 1 VIDEO 2
REMOTE
SETUP
ZONE 2
MAIN
ZONE 3
AUDIO
MULTI OPE
INFO
DISP
MPX PQLS
CH
RECEIVER TV CTRL
TV/DTV
RECEIVER
SC-LX82_LX72.book Page 89 Thursday, April 23, 2009 7:05 PM