Advanced operations for internet radio, Saving internet radio stations, Retrieving saved internet radio stations – Pioneer SC-LX82 User Manual

Page 76: Setting up the network, Playback with home media gallery inputs 07, Sc-lx82, Sc-lx72

Advertising
background image

Playback with HOME MEDIA GALLERY inputs

07

76

En

Advanced operations for Internet radio

SC-LX82:

SC-LX72:

Saving Internet radio stations

This receiver can remember the Internet radio stations
that you often listen to in seven classes (A to G) with up
to nine stations in each class to make the total of 63
stations at its maximum capacity.

Before proceeding with the following steps, check
whether you have followed Steps 2 to 4 on page 71.

1

SC-LX82 only:

Set the remote control operation

selector switch to SOURCE.

2

Tune into the Internet radio station that you want

to save.
Tune into the desired Internet radio station by following
Steps 2 to 4 on page 71.

3

Press T.EDIT to switch to the station-saving mode.

4

Press CLASS to select the class that you want to

save the station in.
Select the desired class from A to G.

5

Use

/ to select the number that you want to

save the station as, and then press ENTER.
You can also select the station number by using the
number buttons. Select the desired number from 1 to 9.

Retrieving saved Internet radio stations

You need to save Internet radio stations first before
retrieving them. If there are no Internet radio stations
currently being saved, see

Saving Internet radio stations

above and save at least one Internet radio station before
proceeding with the following steps.

1

SC-LX82 only:

Set the remote control operation

selector switch to SOURCE.

2

Select the class that you want to retrieve an

Internet radio station from.
Each time you press

CLASS, the class switches to A to G

in turn.

3

Use

/ to select the station number that you

want to retrieve.
You can also select the station number by using the
number buttons.

‘Preset Not Stored’ appears when you select an Internet
radio station currently not being saved.

Setting up the network

In case the router connected to the LAN terminal on this
receiver is a broadband router (with the built-in DHCP
server function), simply turn on the DHCP server
function, and you will not need to set up the network
manually. You must set up the network as described
below only when you have connected this receiver to a
server without the DHCP server function. Before you set
up the network, consult with your ISP or the network
manager for the required settings. It is advisory that you
also refer to the operation manual supplied with your

network component.

1

IP Address
The IP address to be entered must be defined within the
following ranges. If the IP address defined is beyond the
following ranges, you cannot play back audio files stored
on components on the network or listen to Internet radio
stations.
Class A: 10.0.0.1 to 10.255.255.254
Class B: 172.16.0.1 to 172.31.255.254
Class C: 192.168.0.1 to 192.168.255.254

Subnet Mask
In case an xDSL modem or a terminal adapter is directly
connected to this receiver, enter the subnet mask
provided by your ISP on paper. In most of the cases, enter
255.255.255.0.

Gateway IP
In case a gateway (router) is connected to this receiver,
enter the corresponding IP address.

DNS Server Preferred/DNS Server Alternate
In case there is only one DNS server address provided by
your ISP on paper, enter

‘DNS Server Preferred’. In case

there are more than two DNS server addresses, enter
‘DNS Server Alternate’ in the other DNS server address
field.

SOURCE

TV

RECEIVER

VOL

VOL

TVCONTROL

CH

SOURCE

AUDIO

PARAMETER

TOP MENU

BAND

iPod CTRL

LIST

TOOLS

HOME

MENU

STATUS

PHASE CTRL

CH LEVEL

T.EDIT

GUIDE

VIDEO

PARAMETER

INPUT

MUTE

TUNE

TUNE

PRESET

PRESET

MUTE

ENTER

RETURN

PTY

SEARCH

ENTER

T.EDIT

INFO

A.ATT

CLR

SBch

MCACC

HDMI OUT

D.ACCESS

ENTER

CLASS

DISP

CH

ENTER

CLASS

INPUT

MUTE

VOL

CH

TV CONTROL

SLEEP

MCACC

SIGNAL SEL

4

5

6

DIMMER

A.ATT

SBch

7

8

9

CLASS

MASTER

VOLUME

CH LEVEL

D.ACCESS

/CLR

0

ENTER

CLASS

ENTER

T.EDIT
GUIDE

TOP MENU
BAND

RETURN

iPod CTRL

HOME

MENU

LIST

TOOLS

AUDIO

PARAMETER

ENTER

TUNE

PRESET

PRESET

TUNE

VIDEO

PARAMETER

PTY

SEARCH

ENTER

T.EDIT

Note

1 In case you make changes to the network configuration without the DHCP server function, make the corresponding changes to the network

settings of this receiver.

SC-LX82_LX72.book Page 76 Thursday, April 23, 2009 7:05 PM

Advertising
This manual is related to the following products: