Pioneer SC-LX82 - Manual (Page 64)

Listening to your system 06
64
En
Setting the Up Mix function
In a 7.1-channel surround system with surround
speakers placed directly at the sides of the listening
position, the surround sound of 5.1-channel sources is
heard from the side. The Up Mix function mixes the
sound of the surround speakers with the surround back
speakers so that the surround sound is heard from
diagonally to the rear as it should be.
1
• Using the Up Mix function is effective when the
speakers in the 7.1-channel surround system are set
up as recommended in the example on page 22.
• Depending on the positions of the speakers and the
sound source, in some cases it may not be possible
to achieve good results. In this case, set the setting to
OFF.
1 Switch the receiver into standby.
2 While holding down ENTER on the front panel,
press  STANDBY/ON.
The display shows RESET  NO .
Use
/ to select UP MIX  ON , and then use /
to select ON or OFF.
3 Press ENTER to confirm.
• When set to ON, the UP MIX indicator on the front
panel lights.
Selecting MCACC presets
• Default setting: MEMORY 1
If you have calibrated your system for different listening
positions
2
, you can switch between settings to suit the
kind of source you’re listening to and where you’re sitting
(for example, watching movies from a sofa, or playing a
video game close to the TV).
SC-LX82:
SC-LX72:
1 Set the remote control to the receiver operation
mode.
2 While listening to a source, press MCACC.
Press repeatedly to select one of the six MCACC presets 3 .
See Data Management on page 118 to check and
manage your current settings.
Note
1 • Set to ON regardless of this setting when playing DTS-HD signals.
• May automatically be set to OFF even when set to ON, depending on the input signal and listening mode.
?
C SW FL FR
SL SR
SBL SBR SBL SBR
C SW FL FR
SL SR
Up Mix OFF Up Mix ON
 STANDBY/ON
INPUT
SELECTOR
PHASE CONTROL ADVANCED MCACC PQLS HDMI
MASTER
VOLUME
PHONES
SPEAKERS
CONTROL
MULTI-ZONE
ON/OFF
MCACC
SETUP MIC
PARAMETER
ENTER
(TUNE)
(TUNE)
(PRESET) (PRESET)
AUDIO VIDEO
TUNER EDIT
USB HDMI 4 VIDEO CAMERA
iPod iPhone
AUTO SURR/ALC/
STREAM DIRECT
HOME
THX
STANDARD
SURROUND ADVANCED
SURROUND STEREO BAND
HOME MENU RETURN
2 Different presets might also have separate calibration settings for the same listening position, depending on how you’re using your system.
These presets can be set in Automatically setting up for surround sound (Auto MCACC & Full Band Phase Control) on page 45 or Automatic
MCACC (Expert) on page 107, either of which you should have already completed.
3 • These settings have no effect when headphones are connected.
• You can also press / to select the MCACC preset.
SOURCE
TV RECEIVER
VOL
VOL
TV CONTROL
CH
RECEIVER
PGM MENU
SIGNAL SEL SLEEP AUDIO
INFO
DIMMER
A.ATT
CLR
SBch MCACC
HDMI OUT
D.ACCESS
ENTER
CLASS
DISP
CH
MCACC
1 2 3
HDMI OUT
SLEEP MCACC
INPUT
SELECT
SIGNAL SEL
4 5 6
DIMMER A.ATT SBch
7 8 9
CLASS CH LEVEL D.ACCESS
/CLR 0 ENTER
MCACC
5
REMOTE
SETUP
ZONE 2
MAIN
ZONE 3
AUDIO
MULTI OPE
INFO
DISP
MPX PQLS
CH
RECEIVER TV CTRL
TV/DTV
RECEIVER
SC-LX82_LX72.book Page 64 Thursday, April 23, 2009 7:05 PM