Pioneer SC-LX82 - Manual (Page 91)

Using other functions 09
91
En
SC-LX72:
• Set the remote control to the receiver operation
mode, then press DIMMER repeatedly to change the
brightness of the front panel display.
Switching the HDMI output
Set which terminal to use when outputting video and
audio signals from the HDMI output terminals (
HDMI
OUT ALL, HDMI OUT 1 or HDMI OUT 2).
The HDMI OUT1 terminal is compatible with the KURO
LINK function.
SC-LX82:
SC-LX72:
• Set the remote control to the receiver operation
mode, then press HDMI OUT.
Please wait a while when
Please wait ... is displayed.
The output switches among HDMI OUT ALL, HDMI OUT 1
and HDMI OUT 2 each time the button is pressed. 1
Checking your system settings
Use the status display screen to check your current
settings for features such as surround back channel
processing and your current MCACC preset.
SC-LX82:
SC-LX72:
1 Set the remote control to the receiver operation
mode, then press STATUS to check the system settings.
These appear on the front panel display.
2
The front panel display shows each of the following
settings for three seconds each:
2 When you’re finished, press STATUS again to
switch off the display.
Note
1 • Synchronized amp mode on page 84 is canceled when the HDMI output is switched. If you wish to use the synchronized amp mode, switch
to HDMI OUT 1, then select the synchronized amp mode on the flat screen TV using the flat screen TV’s remote control.
• When the power is turned off then back on after switching the HDMI output, the input is set to a setting between HDMI1 and HDMI4, or BD.
INPUT
1 2 3
HDMI OUT
SLEEP MCACC
SELECT
SIGNAL SEL
4 5 6
DIMMER A.ATT SBch
7 8 9
CLASS
MASTER
VOLUME
CH LEVEL D.ACCESS
/CLR 0 ENTER
DIMMER
9
REMOTE
SETUP
ZONE 2
MAIN
ZONE 3
AUDIO
MULTI OPE
INFO
DISP
MPX PQLS
CH
RECEIVER TV CTRL
TV/DTV
RECEIVER
SOURCE
TV RECEIVER
VOL
VOL
TV CONTROL
CH
RECEIVER
SIGNAL SEL SLEEP AUDIO
INFO
DIMMER
A.ATT
CLR
SBch MCACC
HDMI OUT
D.ACCESS
ENTER
CLASS
DISP
CH
HDMI OUT
TUNER iPod USB
1 2 3
HDMI OUT
SLEEP MCACC
INPUT
SELECT
SIGNAL SEL
4 5 6
DIMMER A.ATT SBch
7 8 9
VIDEO 1 VIDEO 2
3
HDMI OUT
REMOTE
SETUP
ZONE 2
MAIN
ZONE 3
AUDIO
MULTI OPE
INFO
DISP
MPX PQLS
CH
RECEIVER TV CTRL
TV/DTV
RECEIVER
2 If the Pure Direct mode is switched on, some settings above will show OFF, even though they are on.
Input Source
↓
Sampling Frequency
↓
Surround Back channel Processing
↓
MCACC preset
↓
ZONE 2 input
↓
ZONE 3 input
↓
KURO LINK
↓
HDMI OUT
SOURCE
TV RECEIVER
VOL
VOL
TVCONTROL
CH
RECEIVER
iPod CTRL
HOME
MENU
STATUS
THX PQLS MPX
PHASE CTRL CH LEVEL
TUNE
PRESET PRESET
PGM MENU
STEREO
AUTO/ALC/
DIRECT STANDARD ADV SURR
ENTER
RETURN
PTY
SEARCH
STATUS
PHASE CTRL STATUS
REMOTE
SETUP
HDD PGM DVD
THX
AUDIO
MULTI OPE
INFO
DISP
MPX PQLS
CH
RECEIVER TV CTRL
TV/DTV
RECEIVER
STATUS
SC-LX82_LX72.book Page 91 Thursday, April 23, 2009 7:05 PM