AirLive MW-2000S - Manual (Page 126)

Chapter 7. Web Interface Configuration
AirLive MW-2000S User’s Manual
121
Firewall Rules: This link leads to the policy's Firewall Rules page. Rule No. 1 has the highest priority;
rule No. 2 has the second priority, and so on. Each firewall rule is defined by Source, Destination, a
Service out of the policy's Service List and a Pass/Block action. Optionally, a Firewall Rule Schedule can
be set to specify when the firewall rule is enforced; it can be set to Always, Recurring or One Time.
¾ Specific Route Profile: Click the button of Setting for Specific Route Profile, the Specific Route Profile
list will appear. The default gateway of WAN1, WAN2, or a desired IP address can be defined in a policy.
When Specific Default Route is enabled, all clients applied this policy will access the Internet through this
default gateway.
IP Address (Destination): The destination IP address of the host or the network.
Subnet Netmask: Select a destination subnet netmask of the host or the network.
IP Address (Gateway): The IP address of the next router to the destination.