AirLive MW-2000S - Manual (Page 179)

Appendix A: Network Configuration on PC
AirLive MW-2000S User’s Manual 174
5) Using Specific IP Address: If you want to use specific IP address, you have to ask the network
administrator for the information of the MW-2000S: IP address, Subnet Mask, New gateway and DNS
server address.
Note: If your PC has been set up completed, please inform the network administrator before proceeding to
the following steps.
y Please choose “Use the following IP
address” and enter the information given
from the network administrator in “IP
address” and “Subnet mask” If the DNS
Server column is blank, please choose
“Using the following DNS server
addresses” and then enter the DNS
address or the DNS address provided by
ISP and then click OK.
y Then, click Advanced in the window of
“Internet Protocol (TCP/IP)”.