AirLive MW-2000S User Manual
Page 176
Appendix A: Network Configuration on PC
AirLive MW-2000S User’s Manual
171
3) Using DHCP: If you want to use DHCP, please
choose “Obtain an IP address automatically”
on the “IP Address” label and click OK. This is
also the default setting of Windows. Then, reboot
the PC to make sure an IP address is obtained
from MW-2000S.
4) Using Specific IP Address: If you want to use
specific IP address, you have to ask the network
administrator for the information of MW-2000S: IP
address, Subnet Mask, New gateway and DNS
server address.
Note: If your PC has been set up completed, please inform the network administrator before proceeding to the
following steps.
y
Please
choose
“Specify an IP address”
and enter the information given by the
network administrator in “IP Address” and
“Subnet Mask” on the “IP Address” label
and then click OK.