AirLive MW-2000S - Manual (Page 135)

Chapter 7. Web Interface Configuration
AirLive MW-2000S User’s Manual 130
Security: There are four kinds of security type, WEP, WPA, WPA2 and WPA2 MIXED for selection.
y
Disable: Choose this type, there is no any encryption used but 802.1x Authentication and
Authentication Type. For Authentication Type, choose Open System, Shared Key, or Both according
to the settings of the AP and Client. Check 802.1x Authentication to enable this function and enter the
related data, if necessary.
y
WEP: WEP uses an encryption key that automatically encrypts outgoing wireless data. On the receiving
side, the same encryption key enables the computer to automatically decrypt the information so it can
be read. Select Authentication Type (Open System, Shared Key or Both), Key Length (64 bits or 128
bits), Key Index (Key1~Key4) and then input the Key. Check 802.1x Authentication to enable this
function and enter the related data, if necessary.
y
WPA: WPA is Wi-Fi’s encryption method that protects unauthorized network access by verifying network
users through a server. Select 802.1x or WPA-PSK security type and enter the related information
below.
y
WPA2: Wi-Fi Protected Access version 2. It is similar to security method of WPA to protect Wi-Fi
networks but provides stronger data protection and network access control than WPA. Select 802.1x or
WPA-PSK security type and enter the related information below. WPA2 only can use AES encryption
type.
y
WPA Mixed: If using TKIP and AES encryption type at the same time is desired, choose this security
type. Select 802.1x or WPA-PSK security type and enter the related information below.