AirLive MW-2000S - Manual (Page 60)

Chapter 6. Multi-Service Zones
AirLive MW-2000S User’s Manual
55
6.3 Setup Internet Connection
STEP 1 ﹒ Enter System Configuration Æ WAN1 Configuration to define the WAN connection. User can configure
WAN connecting type with Static IP, Dynamic IP, PPPoE, or PPTP client based on the request.
STEP 2 ﹒ If user applies two Internet connections, the second line can be setup at WAN2, and enable Load balancing
or Failover function at WAN Traffic Setting. For more information to configure WAN port setting, please
check Chapter 7.1.3, Chapter 7.1.4, and Chapter 7.1.5.