AirLive MW-2000S User Manual
Page 139
Advertising
Chapter 7. Web Interface Configuration
AirLive MW-2000S User’s Manual
134
y
Auto-Discover: Click Configure to enter Auto-Discovery interface to go on related configuration.
The Interface and AP Access configuration is the same as the settings mentioned above. When
Auto-Discovery Status function is enabled, the system will scan once every 10 minutes or according to the
time set by the administrator. If any AP is discovered and “Auto-Add AP” is enabled, it will be assigned an
available IP from the IP pool set within the interfaces and applied with the selected template.
Advertising