AirLive MW-2000S - Manual (Page 14)

Chapter 3. Base Installation
AirLive MW-2000S User’s Manual
9
3.2 Quick Software Configuration
There are two simple ways to configure the Hotspot system: Instant Account and Configuration Wizard.
3.2.1 Instant Account
MW-2000S provides three different level account; admin, manager and operator. The default username and
password as follows:
Admin: The administrator can access all area of the AirLive MW-2000S.
User Name: admin
Password: airlive
Manager: The manager only can access the area under User Authentication to manager the user account, but no
permission to change the settings of the profiles of Firewall, Specific Route and Schedule.
User Name: manager
Password: airlive
Operator: The operator only can access the area of On-demand Account Creation to create and print out the new
on-demand user accounts.
User Name: operator
Password: airlive
Each account owns the specific access right:
The network constructor can deploy the default system by admin account;
The system manager can change or create further authentication rule by manager account;
The operator just needs to create new account and print out the ticket for customer by operator account.
Following is the example to configure the system per different user account:
For admin account:
1. Select the Connection Type for WAN Port
2. Choose System’s Time Zone
3. Configure Policy setting based on customer’s request
For manager account:
1. Set up Authentication Configuration for on-demand User Server Configuration
2. Change Billing Configuration
3. Select the Policy to configure Traffic Class, Individual bandwidth for uplink and downlink, and also create Black
list and Additional Configuration.
For operator account:
1. Create new account
2. Print out the ticket
Please check the following steps to complete the quick configuration