AirLive MW-2000S - Manual (Page 88)

Chapter 7. Web Interface Configuration
AirLive MW-2000S User’s Manual
83
y
PPPoE Client: When selecting PPPoE to connect to the network, please set the “User Name” and
“Password”. There is a Dial on demand function under PPPoE. If this function is enabled, Maximum Idle
Time can be set. When the idle time is reached, the system will automatically disconnect itself.
y PPTP Client: Set WAN1 port to connect to external PPTP server to establish PPTP VPN tunnel. Select STATIC
to specify the IP address of the PPTP Client manually or select DHCP to get the IP address automatically. The
fields with red mark are required. Please fill in these fields. There is a Dial on demand function under PPTP. If
this function is enabled, a Maximum Idle Time can be set. When the idle time is reached, the system will
automatically disconnect itself.