AirLive MW-2000S User Manual
Page 136
Chapter 7. Web Interface Configuration
AirLive MW-2000S User’s Manual
131
¾
Access Control: In this function, when the status is “Enabled”, only these clients whose MAC addresses
are listed in this list can be allowed to connect to the AP. When “Disabled” is selected, all clients can
connect to the AP. The default is Disabled.
y
Status
After clicking the hyperlink of Status, the basic information of the AP including AP Name, AP Type, LAN MAC,
LAN MAC, Wireless LAN MAC, Up Time, Report Time, SSID, Number of Associated Clients and Remark
can be observed. In the below of the AP Status Detail, there are related detailed information, System Status,
LAN Status, Wireless LAN Status, Access Control Status and Associated Client Status.
¾
System Status: The table shows information about AP Name, AP Status and Last Reporting Time.