AirLive MW-2000S User Manual
Page 181
Advertising
Appendix A: Network Configuration on PC
AirLive MW-2000S User’s Manual
176
2) Click the right button of the mouse on the “Local
Area Connection” icon and select “Properties”
3) Select “General” label and choose “Internet
Protocol (TCP/IP)” and then click Properties.
Now, you can choose to use DHCP or specific IP
address, please proceed to the following steps.
4) Using DHCP: If want to use DHCP, please
choose “Obtain an IP address automatically”
and click OK. This is also the default setting of
Windows. Then, reboot the PC to make sure an
IP address is obtained from MW-2000S.
Advertising