CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 246)

230
4.1.6 Extracting Frames from a Video Event
You can extract certain frames of a video event and save them as another event.
1. Click the Save As Avi button (No. 2, Figure 4-2), and select Display Merging List. This dialog
box appears.
Figure 4-16
2. Select a desired video file from the Video Event list.
3. Click the Play button on the Playback Panel to play the video.
4. To set the start frame, click the A to B Mode button ● in the Merging List dialog box. The button
turns black. If you want to reset the start frame, click the Cancel button and then click the A
to B Mode button ● again to set a new start frame.
5. To set the end frame, click the A to B Mode button ● . The system starts extracting the specified
frames from the file. When the extract is complete, the Status field displays “Complete”.
6. To view the extract, click the arrow button on the list, and select Play.
7. To view where the file is located, click the arrow button on the list and select Open Path.
Note: If you want to clear the entries on the Merging List, click the arrow button beside the desired
entry, and select Clear. The entry will be deleted, but the saved file is still kept in the storage
location.