CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 626)

610
11.16.5 Sending GPS Data to the GV-GIS
You can configure up to 4 GV-GIS stations to receive the GPS data of the GV-System and connected
IP devices simultaneously.
Sending Only GPS Data of the GV-System
To send only GPS data of GV-System to the GV-GIS station, follow the steps below. On the GV-GIS
station, a Mobile Host account for GV-System needs to be created first.
1. To allow the remote access from GV-GIS to GV-System, enable Control Center Server from the
Network button on the main screen.
2. Click the button on the GV-GIS Client window (Figure 11-90). This dialog box appears.
Figure 11-95
3. In the GPS Data Source Selection section, select GPS Receiver.
4. In the Connection Information section, type the IP address of GV-GIS. Keep the default port value
of 3356, or modify it if necessary.
5. In the Account for GPS Receiver to Connect GV-GIS Server section, type login ID and password
already created on GV-GIS for GV-System.
6. Click OK.