CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 33)

Configuring Main System
17
1
1.2.2 Setting Data Storage
You can change storage locations of recorded files and event database files. You can also enable or
disable the recycle function for recorded files.
Click the Configure button (No. 14, Figure 1-2), select General Setting and select System
Configure. Under the General Setting tab, you can see the storage information in the middle as
illustrated below.
Figure 1-7
„ Available: Indicates the remaining hard disk space.
„ Recycle Log: Indicates the recording date of the next video file to be deleted.
„ Recycle: When this option is selected, the oldest files will be deleted when the system requires
storage space for new files. If it is not selected, the system will stop recording when disk space is
full.
By default, the system has the following default settings.
Default Data Storage Settings
Recorded Files :\GV folder\<camxx or audxx folder>. Storage Location
Event Database Files :\GV folder\<camxx or audxx database
file>
Recycle Function Enabled