CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 350)

334
7.2.2 Network Connection
1. Connect the GV-System and POS device to the network as illustrated below.
Figure 7-7
2. Insert the Surveillance System Software DVD to the POS device. It runs automatically, and a
window appears.
3. Click Install V 8.4.0.0 System.
4. Select Software POS Driver (Only for Graphic mode POS System), and follow on-screen
instructions to complete the installation.
5. Select POS Data Sender from Windows Start Menu. The POS Data Sender dialog box appears.
6. Select TCP/IP.
7. Type Password or modify Port value to match those on the GV-System if necessary. By default,
the port value is 4000, and the password fields in both POS Data Sender and GV-System are left
blank. The first-time user can skip the step and follow the next step to test the connection.
Settings on POS Data Sender Settings on GV-System
Figure 7-8