CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System - Manual (Page 59)

Configuring Main System
43
1
1.4 Camera Monitoring
Click the Monitor button and select to start or stop all or individual camera monitoring. Camera Name
in the upper left corner of the view screen changes from yellow to red color when motion is detected.
(Blinking represents that motion is detected in the camera view). [F7] is the shortcut key of this
operation.
1.4.1 Snapshot
To take a snapshot of the current frame, click the Camera Name and select SnapShot to open the
Save As dialog box, shown as below. You can select to watermark or de-interlace the snapshot, as
well as tagging the frame with Host name, Camera name, Time and Date. Select Transparent Text if
you want to make the tag background transparent, and select Set Font to choose your text font.
Click to display date
Click to display camera name
Transparent text background
Set font for overlaid text
Click to display host name
Click to de-interlace
Click to display time
Click to watermark the snapshot
Figure 1-28