CCTV Camera Pros Geovision 8.4 Multicam Digital Surveillance System User Manual
Page 445
Remote Viewing
429
8
Playing Back the Recordings
To play back the recordings, follow these steps:
1. Enable these two functions on the WebCam Server.
A. Enable
the
Run ViewLog Server option on the General tab. For details, see General
Settings in WebCam Server Settings earlier in this chapter.
B. Enable
the
Mobile function on the Mobile tab, and keep the RPB port to be 5511 or modify it
if necessary. For details, see Mobile Settings in WebCam Server Settings earlier in this
chapter.
2. Execute
GV-GView V2 on your PDA.
3. Click the button located at the lower left corner (see Figure 8-54). The login screen appears.
Figure 8-56
4. Enter the IP address of the GV-System, port value (default value is 5511), a username and a
password. Then click OK to connect.
5. Select the desired recording on the event list for playback.
Note:
1. The remote playback (RPB) function is only supported if the video was recorded with a resolution
of CIF or lower.
2.
The remote playback (RPB) function does not support the playback of video files recorded on the
GV IP devices.